PS5 Remote Play Not Working Fix: Follow Sony’s Own Checklist
You settle on the sofa, phone in hand, ready to carry on your game — and nothing happens. The app spins, the connection drops, or your PS5 never wakes up. A ps5 remote play not working fix is usually closer than it feels: most failures come down to a short list of settings, speeds, and network quirks Sony itself documents.
Remote Play streams your PS5 over your network, so it is only ever as good as the connection between the two ends. That is good news: a ps5 remote play not working fix rarely needs new hardware — it needs the right setting, enough speed in both directions, or a router that stops blocking the stream.
Table of Contents
What Remote Play Actually Needs
Turn On Remote Play
Check Your Internet Speed
Restart Everything
Fix Your NAT Type
Update Your PS5 and the App
Check PSN Status and Sign-In
Games Remote Play Will Not Play
Still Stuck? Last Checks
FAQs
What PS5 Remote Play Actually Needs
SUMMARY: Remote Play needs 5 Mbps up and down minimum, 15 Mbps or more recommended — the first step in any ps5 remote play not working fix is measuring your setup against Sony’s baseline.
Remote Play is a stream, not a download, so upload speed matters as much as download speed. Sony’s baseline is 5 Mbps upload and download minimum, 15 Mbps or more recommended in both directions. Below that, the picture stutters, the sound cuts out, or the connection fails.
| Requirement | Sony’s figure |
|---|---|
| Minimum speed | 5 Mbps upload and download |
| Recommended speed | 15 Mbps or more in both directions |
| Connection type | UDP port 8572 |
| NAT warning | NAT Type 3 may prevent Remote Play working |
Almost every step below comes back to one of those four rows. A ps5 remote play not working fix that ignores speed and NAT type is guesswork.

Turn On Remote Play the Right Way
SUMMARY: Remote Play must be switched on in the PS5 settings, with two rest-mode options, or the console will never wake up — the most common ps5 remote play not working fix.
This sounds obvious, and that is why it catches so many people out. On your PS5, go to Settings, then System, then Remote Play, and turn on Enable Remote Play. If that switch is off, your phone or laptop can search all day and find nothing — the simplest ps5 remote play not working fix there is.
Two more settings hide in the rest-mode options: turn on “Stay Connected to the Internet” and “Enable Turning on PS5 from Network”. Without the first, your console drops off the network the moment it rests; without the second, it cannot wake up when your device calls. Together, they are why so many players find a ps5 remote play not working fix in a menu they had never opened.
Also check you use the same PlayStation Network account on the console and the Remote Play app — a mismatched account is a silent failure. Our PS5 console sharing and offline play setup guide explains sharing and sign-ins on the same machine.
Check Your Internet Speed First
SUMMARY: Test the speed at both ends of the stream — a ps5 remote play not working fix starts with measuring both sides.
Run a speed test on the device you want to play on, then check the connection on your PS5. Remember the numbers above: 5 Mbps up and down minimum, 15 Mbps or more in both directions recommended. If your phone shows a healthy download but a weak upload, you have found your culprit — and the ps5 remote play not working fix is a network problem, not a PlayStation problem.
A few standard steps help here:
- Move closer to your router, or switch to the 5 GHz band.
- Plug the PS5 into the router with an Ethernet cable if you can — a wired console streams far more steadily.
- Pause big downloads, cloud backups, and video streams on other devices while you test.

Restart Everything in the Right Order
SUMMARY: A proper restart of the console, the router, and the app clears the temporary glitches behind many failed streams — the simplest ps5 remote play not working fix of all.
Order matters. First, fully close the Remote Play app — do not just minimise it. Then restart your PS5 properly: hold the power button until it beeps twice and powers off fully, then switch it back on. A rest-mode nap is not the same as a restart, and a ps5 remote play not working fix often starts with a console that has not had a clean boot in weeks.
Next, restart your router: unplug it, wait thirty seconds, plug it back in, and give it a couple of minutes to come back online. Then try the app again. If it still fails, move on to the NAT check below — the next step in your ps5 remote play not working fix.
NAT Type 3 and the PS5 Remote Play Not Working Fix
SUMMARY: NAT Type 3 can block Remote Play outright, so check your console’s NAT type and open UDP port 8572 — for many players, this is the ps5 remote play not working fix.
NAT type is the setting most players have never heard of — until it ruins their evening. Sony warns that NAT Type 3 may prevent Remote Play working. Run the connection test in your PS5 network settings: Type 1 and Type 2 are generally fine; Type 3 is the one that causes trouble.
| NAT type | What it means for Remote Play |
|---|---|
| Type 1 | Open — Remote Play should work |
| Type 2 | Moderate — Remote Play should work |
| Type 3 | Strict — may prevent Remote Play working |
Remote Play uses UDP port 8572, so if your NAT type is 3, let that port through your router with port forwarding: log in to your router’s settings, forward UDP port 8572 to your PS5’s local IP address, and save. Router menus differ, so check your router maker’s guide for the exact clicks. If that sounds daunting, our Xbox NAT type strict fix guide explains the same NAT idea on another console.
Skip the DMZ shortcut some players suggest — it exposes the console directly to the internet, so try port forwarding first. If your NAT type is stuck on 3 even after forwarding, your internet provider may be using carrier-grade NAT, and only they can change that.
Update Your PS5 and the Remote Play App
SUMMARY: Outdated system software or an old Remote Play app can break a connection that used to work — a classic ps5 remote play not working fix.
Check your PS5 system software at Settings, then System, then System Software, and install any update waiting. Then update the Remote Play app through your usual app store. A ps5 remote play not working fix that starts with “everything is up to date” is worth far more than one built on old software.
Old app versions are a particular trap after a big PS5 update, because the console and the app can drift out of step. If Remote Play worked last week and broke today, an update on one side is the most likely explanation. Update both, restart both, and try again — a simple ps5 remote play not working fix that works more often than players expect.
Check PSN Status and Your Sign-In
SUMMARY: If PlayStation Network is having trouble, or your sign-in has expired, no local fix will help — a ps5 remote play not working fix cannot fix an outage.
Sometimes the problem is not in your house at all. Before you spend an evening rebuilding your network, check the PlayStation Network status page for PSN issues. If the service is down, the only fix is patience — the stream will come back when the service does.
Sign-in trouble is the quieter cousin of an outage. If your PSN password changed recently, the app may be holding an old session. Sign out completely, sign back in with the same account you use on your PS5, and try again. It takes a minute, and it solves more failed connections than most players expect.
Games Remote Play Will Not Play
SUMMARY: A small group of games is excluded from Remote Play by design — sometimes the ps5 remote play not working fix is realising there is nothing to fix.
Here is the check that saves the most wasted time: some games simply cannot be played through Remote Play. Games that need PS VR or PS VR2 are excluded, because a streamed phone screen cannot replace a headset. Games streamed via PS Plus Premium are also excluded — Remote Play streams from your own console, not from Sony’s cloud.
If the game you want is one of those, the answer is not a fix at all: play it on the console itself, or pick a game installed on your PS5. Knowing this early stops you from rebuilding your network for a game that was never going to stream. Once you are back up, our PS5 multiplayer games round-up is a good place to start.
Still Stuck? The Last PS5 Remote Play Not Working Fix Checks
SUMMARY: Final checks — device support, distance, and a clean reinstall — cover the remaining reasons a stream can fail.
If every section above is done and the stream still will not start, run through this final ps5 remote play not working fix list:
- Make sure your device is supported: very old operating systems may not run the current version.
- Try a different device: if your phone fails but your laptop connects, the problem is the phone.
- Try the same room first: if it works next to your router but fails elsewhere, your Wi-Fi coverage is the issue.
- Delete the Remote Play app and reinstall it — a clean install clears corrupted settings an update cannot reach.
Work through them one at a time and test after each one, so you know which step fixed it. Next time you will know the ps5 remote play not working fix that worked for you. Bookmark this page — we will update it when Sony changes the Remote Play requirements.
FAQs
SUMMARY: The questions players ask most about a ps5 remote play not working fix, answered with the Sony facts above.
Why does PS5 Remote Play keep disconnecting?
Usually an unstable connection on either end. Sony’s baseline is 5 Mbps upload and download minimum, with 15 Mbps or more recommended in both directions — dip below that and the stream drops. If yours keeps dipping, a ps5 remote play not working fix starts with a wired console, a closer router, and paused downloads.
What speed do I need for PS5 Remote Play?
Sony’s minimum is 5 Mbps upload and download, 15 Mbps or more in both directions recommended. A ps5 remote play not working fix often starts here, because a stream needs strong upload speed on the console side as well as download speed on your device.
Can NAT Type 3 stop Remote Play working?
Yes. Sony warns that NAT Type 3 may prevent Remote Play working, and Remote Play uses UDP port 8572. If your PS5 reports NAT Type 3, forward UDP port 8572 to your console and test again — that is the ps5 remote play not working fix for a strict network.
Why will my PS5 not wake up for Remote Play?
Check the rest-mode settings: “Stay Connected to the Internet” and “Enable Turning on PS5 from Network” both need to be on, along with Enable Remote Play at Settings, then System, then Remote Play. Without those, the console cannot hear your device calling — and that is the ps5 remote play not working fix for a console that will not wake up.
Can I play every PS5 game with Remote Play?
No. Games that need PS VR or PS VR2 are excluded, and games streamed via PS Plus Premium are excluded too. Remote Play streams games installed on your own console — and no ps5 remote play not working fix exists for one.
Does Remote Play work away from home?
It can, but it depends on the network you are on: your PS5 needs its usual connection at home, and your phone or laptop needs a strong connection wherever you are. Public and hotel Wi-Fi sometimes blocks Remote Play traffic, so on the road a ps5 remote play not working fix often means a mobile hotspot.
For More Updates Visits: GAME CRESTA





